Mitee-Bite

Browse these categories under "Mitee-Bite"

Dyna Force Clamps
These clamps feature jaws that advance on an angle for positive down-force.
Fixture Clamps – Machinable (Inch)
These low profile clamps hold round or irregularly shaped workpieces directly to a fixture plate or stop.
Fixture Clamps – Machinable (Metric)
These low profile clamps hold round or irregularly shaped workpieces directly to a fixture plate or stop.
Hex (Inch)
Made up of a hardened steel socket cap screw with an offset head and a brass hex washer. By tightening down on the screw, the washer is forced towards the work piece to provide fast strong clamping.
Hex (Metric)
Made up of a hardened steel socket cap screw with an offset head and a brass hex washer. By tightening down on the screw, the washer is forced towards the work piece to provide fast strong clamping.
Pit Bull Clamps – Machinable (Inch)
These clamps provide positive down-force and a very low gripping profile.
Pit Bull Clamps – Machinable (Metric)
These clamps provide positive down-force and a very low gripping profile.
Pit Bull Clamps – Modular – Compact (Inch)
These clamps are ideal for clamping workpieces in series by using the back surface of the clamp to locate the next workpiece.
Pit Bull Clamps – Modular – Compact (Metric)
These clamps are ideal for clamping workpieces in series by using the back surface of the clamp to locate the next workpiece.
Pit Bull Clamps – Modular – Slotted  (Inch)
These clamps support workpieces off the machining table with a unique riser step design.
Pit Bull Clamps – Modular – Slotted  (Metric)
These clamps support workpieces off the machining table with a unique riser step design.
Knife Edge
Edges are grooved for clamping rough cut stock, castings and other materials that require a hardened clamping element.
Compact Toe (Inch)
Positive down force while using very little space on a fixture. The work piece can be clamped in series by using the back surface of a clamp to locate the next work piece.
T-Slot (Inch)
Combine the cam action fixture clamps with a T-nut. They lock into a machine T-slot for low profile clamping and makes set up quick and easy.
T-Slot (Metric)
Combine the cam action fixture clamps with a T-nut. They lock into a machine T-slot for low profile clamping and makes set up quick and easy.
Uniforce (Inch)
Compact and economical clamps enable you to fixture more parts on the machine table. The steel wedge spreads the clamping force uniformly on both sides.
Uniforce (Metric)
Compact and economical clamps enable you to fixture more parts on the machine table. The steel wedge spreads the clamping force uniformly on both sides.
ID Expansion (Inch)
An ideal way to hold multiple parts on an inside diameter for multiple machining on a vertical or horizontal machining center.
ID Expansion (Metric)
An ideal way to hold multiple parts on an inside diameter for multiple machining on a vertical or horizontal machining center.
Pitbull Low Profile (Inch)
Positive down force and a low gripping profile. They use a standard cap screw held in place with an o-ring.
Pitbull Low Profile (Metric)
Positive down force and a low gripping profile. They use a standard cap screw held in place with an O-ring.
Compact Toe (Metric)
Positive down force while using very little space on a fixture. The work piece can be clamped in series by using the back surface of a clamp to locate the next work piece.