Fixed/Non-Adjustable

High speed steel, carbide tipped, solid carbide, diamond surface and urethane surface fixed grippers. Available with thru-hole tap or c'bored.

Browse these categories under "Fixed/Non-Adjustable"

Urethane Surface (Inch)
A urethane surface is permanently bonded to a 300 series stainless steel pad. The non-marking, non-staining urethane provides excellent protection against damage.
Urethane Surface (Metric)
A urethane surface is permanently bonded to a 300 series stainless steel pad. The non-marking, non-staining urethane provides excellent protection against damage.
Diamond Surface (Inch)
The abrasive surface is permanently fused to a stainless steel pad. The surface texture is comparable to a 100 grit abrasive.
Diamond Surface (Metric)
The abrasive surface is permanently fused to a stainless steel pad. The surface texture is comparable to a 100 grit abrasive. They are ideal for holding smooth or slippery applications.
Diamond - C`Bored (Inch)
The abrasive surface is permanently fused to a stainless steel pad. The surface texture is comparable to a 100 grit abrasive. They are ideal for holding smooth or slippery applications.
Diamond - C`Bored (Metric)
The abrasive surface is permanently fused to a stainless steel pad. The surface texture is comparable to a 100 grit abrasive.
Carbide Pad(Inch)
Made from solid carbide for high wear resistance and serrated for additional gripping strength. Can be brazed or bonded in jigs, fixtures, clamps, etc. The bottom is chamfered for clearance in mounting pocket.
Solid Carbide (Inch)
Made from solid carbide for high wear and high load applications. Serrated for positive holding in tough applications.
Carbide Tipped (Inch)
Constructed with a serrated carbide gripper pad brazed to a heat treated alloy steel body. Blind-hole tap for back side mounting. Flat on O.D. for set screw mounting.
HS - Tool Steel (Inch)
Made from M-2 high speed steel. Serrated for positive holding in tough applications.
HS - C`Bored (Inch)
Made from M-2 high speed steel. Serrated for positive holding in tough applications. Counter bored hole for front mounting with a socket head cap screw.