Terms & Conditions
create an account
section to get the most out of your visit.
You need to upgrade your Flash Player - version 7 or above is needed.
Pull Clamps - One-Touch Heavy Duty (QLPDH)
Heavy Duty Pull Clamp - 65 mm X 50 mm
Clamping Force lbs.
M8X1.25 (14mm Depth)
M10x1.5 (18mm Depth)
These clamps are similar to the Standard Pull Clamps, but they are designed for heavier work pieces and machining loads. They are designed to be used with a user-modified clamping pin or standard clamping screw. By rotating the handle, the clamp pulls the pin or screw downward and secures it in position. Four screws and a locating pin hole allows for secure fastening and precise locating of the clamp. Mounting bases are also available to provide top side mounting. The clamp consists of three holes for mounting a handle. Recommended work piece thickness tolerance is +/-.5mm for the 400 series and +/-.8mm for the 500 series. The maximum handle load is 134 lbs. The body and clamp ring are made from SAE-4140 alloy steel. The handle shaft is made from SAE-1045 alloy steel. Parts are heat treated with black oxide finish. Handle is black plastic.
© 2004-2013 Fixtureworks | 888-794-8687 | 33792 Doreka Drive | Fraser, Michigan 48026 USA